Loading service...
Loading service...
Glass steam showers need an enclosure that holds heat, not just a door that keeps water off the floor. We design and install the glass for Austin steam baths: full panels, a door with real sweeps, and a layout that works with the steam head. The goal is a room that fogs up and stays that way.
A frameless door with a light sweep will drip less, but it will not hold steam. Heat leaves at the top and at every gap. A steam enclosure closes those paths, uses hardware that can live in moisture, and is measured to the curb and ceiling you actually have.
Glass steam showers are not a standard door with a heavier hinge. The panels have to close the room so steam stays inside long enough to matter.
We look at the curb, the ceiling height, and where the steam head sits. If the ceiling is not a steam ceiling, we say so before you buy glass.
Door, panels, and any transom are drawn so the gaps close. You approve the layout and the metal finish.
Panels are cut to the measure, with notches for the head and hardware already planned.
We set the glass, adjust the door into the sweeps, and run through the close so you can feel that it seals.
Steam is a sealing problem. We install shower enclosures every week, so the hinges, sweeps, and wall conditions are familiar. You get glass that is built for moisture, not a decorative panel that clouds and leaks heat.
Install day is usually one visit after the glass arrives. We protect the bath, set the fixed panels, hang the door, and adjust until the sweeps meet. We do not leave a door that you have to lift to latch.
Tempered glass, seals that belong in a wet room, and hinges that can carry a steam door. Finishes are chosen because they live in humidity, not because they looked good in a dry showroom.
We install sealed shower glass across Austin and know where steam jobs fail: a missing transom, a sweep that does not meet the curb, or a ceiling that was never meant to get wet. We look at those before we cut glass.
Discover what makes our glass steam showers service stand out from the competition
We come to your home at no charge to assess your needs, take measurements, and provide expert recommendations tailored to your space.
Our team takes exact measurements to ensure your doors fit perfectly the first time, avoiding costly mistakes and delays.
We use premium hardware and tempered safety glass that meets all building codes and is built to last for years.
Our trained installers have years of experience and know how to handle any bathroom layout or challenge.
Our sealed design ensures you get the best results and peace of mind with every project we complete.
Our steam retention ensures you get the best results and peace of mind with every project we complete.
Explore our related services and solutions
Quality shower enclosures services with expert craftsmanship and attention to detail.
Modern frameless frameless shower enclosures solutions. Comprehensive frameless shower enclosures offerings with premium materials and professional service.
Corner-optimized corner shower enclosures installations. Expert corner shower enclosures services with professional installation and quality materials.
Spacious walk-in walk-in shower enclosures configurations. Professional walk-in shower enclosures solutions tailored to your specific needs and preferences.
Specialized steam steam shower enclosures systems. Quality steam shower enclosures services with expert craftsmanship and attention to detail.
If you are adding a steam unit or replacing glass that lets the heat out, contact us today for a free consultation.
Visit Our Locations
Two offices cover the Austin area.
Austin Office
12600 Hill Country Blvd R-275, Austin, TX 78738
Loading map...
Bringing sparkle and clarity to Austin, one shower at a time! Transforming bathrooms into bright, joyful spaces with custom glass solutions.
Services
Quick Links
Contact Info
Austin Office:
12600 Hill Country Blvd R-275, Austin, TX 78738, United States737-465-3141[email protected]Leander Office:
1309 Leander Dr, Suite 404, Leander, TX 78641, United States737-384-8899[email protected]Mon to Sun: 7 am - 8 pm
Sometimes. The curb, walls, and ceiling have to be able to hold steam. If the shower was built as a normal enclosure, we may need a transom or a different door. We will know after we see it.
We install the glass enclosure. The generator and steam head are usually a plumber or the steam manufacturer. We place the glass around the head location you give us.
It can, if the sweeps and the top of the enclosure actually close. A fully open top will not hold steam. We design the top of the run as part of the job.
A squeegee after use and a cleaner made for shower glass. Steam rooms film up faster. We will show you what to use so you are not etching the glass.
Same family of work. This page is the glass steam shower package: the sealed panels and door. If you already know you want the enclosure style, we can price it from the same visit.
Get your free consultation today and let's bring your vision to life with professional expertise you can trust.
